Innokin

Showing all 7 results

  • aspire-cleito-exo-tank
    TPD

    Aspire Cleito EXO Tank &#..

    3.00 out of 5
    £16.58 excl VAT
    • Employing the latest in flavor enhancing tank technology, Cleito EXO. Prepare to produce your own microclimate! New topside airway to bottom side chimney intake will take flavor and vapor production to next levels, as well as guaranteeing zero leaks. Top fill, easy to disassemble for ultra-low maintenance and convenience of everyday use. Utilizing the well-established Cleito coils, brings you storm clouds of flavour.
    • The Cleito EXO has an improved airflow system, with the air slots wide open on the top-side of the tank, the airflow travels from the top then passes the coil, bringing you massive flavor and vapor production.  With its fully interchangeable coils with the Cleito tank just adds more convenience to your daily vaping. When a Cleito coil is installed the tank capacity will become 3.5ml. The larger sized pre-installed 0.16ohm coil makes tank capacity 2ml. (Cleito EXO 2ml is compliant with TPD regulations).  Just like its predecessor, Cleito EXO is a top fill tank, simply unscrew the top cap and you can add your favorite e-juice in no time.
    Cleito EXO Package Contains: 1 x Cleito EXO tank (2ml version with 0.16ohm coil preinstalled) / 1 x Extra 0.16ohm Coil / 1 x Extra Drip Tip / 2 x Extra O-rings / 1 x Warranty Card / 1 x User Manual.

  • Endura-t18-t22-prism-tank-coils
    TPD

    Innokin Endura T18 Coils ..

    £7.08 excl VAT

    The Innokin Endura T18 Coils 1.5 ohm (5 Pack) is a pack of five replacement coils for the Prism Tank used in the Endura T18 Vaping Kit.  Just like the ones that come with the iSub Tanks, these replacement coils have the resistance of 1.5 ohm and include Japanese organic cotton. Thanks to the “No-Spill Coil Swap System”, they can be replaced in a matter of seconds and without a hassle. To change the burnt out coils, open the base, remove the old coil and replace it with the new one. Close the base and the tank is ready for vaping again.  Depending on whether you’re light, moderate or heavy vaper, one coil will last from 1 to 3 weeks. This means that a 5-pack of replacement coils is sufficient for approximately 1 to 2 months of vaping. You will know when it’s time to unpack a new coil when your tank will stop producing vapour and/or E-Liquid will start to taste differently – less delicious.  NOTE – These coils ONLY fit the T18 tank and not the T18E.

     


  • endura-t20-starter-kit-ecig-innokin 1-500x500
    TPD

    Innokin Endura T20 1500mA..

    £22.00 excl VAT

    The Innokin Endura T20 1500mAh Starter Kit is the latest release in Innokin’s mouth to lung style starter kits. The T20 is a really simple and easy to use starter kit that has been designed and optimised to provide a realistic sensation that replicates the draw of a traditional cigarette that is knows as a “mouth to lung” style inhale.  This device couldn’t be more simple to set up and use.  A go-to starter kit for those looking to make the switch to vaping from smoking.  The Kit contains: 1 x Endura T20 Prism 2ml capacity tank with Top Cap, 1 x Endura T20 1500mAh battery, Micro USB charging cable, 2 x Spare 510 Drip Tips (can be interchanged with any standard 510 tips), Spare O-ring seals for the tank, User Manual, User operating instructions inside the box.


  • Innokin iSub Coils
    TPD

    Innokin iSub Replacement ..

    £9.17 excl VAT

    The Innokin iSub Coils 0.5 ohm, 0.1 & 0.2 ohm Ni200 & 0.5 ohm Clapton BVC (5 Pack) iSub replacement coils for the Innokin iSub Tank.  Just like the ones that come with the iSub Tank, these replacement coils have the resistance of 0.5 ohm, 0.1 ohm & 0.2 ohm Ni200 or 0.5 ohm Clapton BVC and include Japanese organic cotton. Thanks to the “No-Spill Coil Swap System”, they can be replaced in a matter of seconds and without hassle


  • Innokin Kroma_Vape_System
    TPD

    Innokin iTaste Kroma Slip..

    £32.08 excl VAT

    The Innokin iTaste Kroma Slipstream Kit comes complete with the new Slipstream Tank, that has a 2ml capacity and a unique top airflow system. The mod is a 75 watt capable device with variable wattage and temperature control features, including Titanium, Nickel and Stainless Steel coil options. The device has numerous safety features including 15 second cut off and circuit/overheat protection providing the vaper with piece of mind when in use. This compact, sleekly designed set up that looks stylish with an ergonomically satisfying grip makes vaping with this sub-ohm starter kit a dream. TPD Complaint.

     


  • innokin-prism-t20-coils
    TPD

    Innokin Prism T20 Coils 1..

    £9.50 excl VAT

     

    The Innokin Prism T20 Coils are designed for use with the Endura T20 Kit and the Prism T20 tank. The coil has been designed to work with higher VG content liquid than the original series of Prism coil for the T18E tank. They feature a 1.5 Ohm resistance and are best suited to a mouth to lung vape.

    Contains: 5x Innokin Prism T20 1.5 Ohm Coils


  • Slipstream 0.5ohm coil
    TPD

    Innokin Slipstream Coils ..

    £7.92 excl VAT

    The Innokin Slipstream Replacement Coils Designed for the Innokin Slipstream tank, these BVC coils are built for flavour. Features a bottom vertical coil funnelling air from the top of the coil down.  The 0.5 ohm stainless steel coil enhances flavour production and generates bigger clouds. The Stainless steel Slipstream coils are rated to fire between 2 and 30 Watts. These coils can also be used for temperature controlled vaping.