Sony VTC5 18650 2600mAh Battery – 30 Amp is considered one of the go to batteries for Mech Mod and RBA users! Although this battery still can be ran in Variable Voltage Devices as well. This is the Flat top Variant of the battery!
Safe chemistry LiMN means reduced risk of venting with flame or explosion. Due to the safety inherent in IMR safe chemistry batteries there is no protection circuitry added or built in. This provides a slightly shorter battery length to enable a good fit in most mods.
To ensure longevity, it is not recommended to allow the battery to discharge below 2.5V.
Please note that due to their inherent safety, IMR cells don’t have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum charge voltage is 4.25 volts.
This product is for experienced users and requires technical knowledge in order to properly use it.
- Dimensions: 65.2mm (L) x 18.35mm (D)
- Typical Capacity: 2600mAh
- Min Capacity: 2500mAh
- Max Continuous Discharging Current: 30A
- Discharge cut-off voltage: 2.5V
- Voltage: 3.6V
- Full Charge Voltage: 4.2V
Battery Safety – Do not overcharge or leave charging unattended. Only use a suitable charger from a reputable brand (e.g. Nitecore) or the mod itself to charge batteries. Do not carry batteries loose in your pocket or bag, we recommend keeping your batteries in a protective case when not in use, see “You may also like” below.