The Ultimate VooPoo PNP Coil Guide for Beginners 2026

The VooPoo PNP coil system is one of the most widely-used coil platforms in the UK — compatible with over 20 devices and available in 13+ variants covering every vaping style from tight MTL to full sub-ohm DTL. This guide covers every PNP coil in the 2026 range, includes a full compatibility chart, and shows you exactly how to prime a PNP coil so you never get a burnt hit again

What Are PNP Coils? – PNP Coils Explained

The VooPoo PNP coil series is the most versatile coil platform in the UK vaping market. “PNP” stands for Plug ‘n’ Play — a press-fit installation system that replaces traditional threaded connections. Instead of screwing a coil in and risking cross-threading, PNP coils simply push into the pod with a sealed silicone O-ring that prevents leaks and ensures solid contact every time.

Each coil in the range uses a mesh build (except the R-series and TW-series), which heats faster, more evenly, and lasts longer than traditional wire coils. The result: better flavour, less dry-hitting, and fewer replacements.

• PNP coils — the original range, compatible with Drag S/X, Argus, Vinci and dozens more.
• PNP-X coils — the updated format used in the Drag S PNP-X and Drag X PNP-X.

Are VooPoo PNP Coils Good?

Yes — VooPoo PNP coils are consistently among the best-reviewed coils in the UK market. Their reliability comes down to three things: the press-fit connection eliminates the weak-point of threaded coils; the mesh build distributes heat evenly; and the range covers resistance levels from 0.15Ω right up to 1.2Ω, meaning whether you’re a cloud-chasing DTL vaper or a tight-draw MTL vaper transitioning from disposables, there’s a PNP coil built for your style.

Typical coil lifespan is 7–14 days with regular use, though this depends on e-liquid sweetener levels — high-sweetener liquids will shorten coil life faster.

Pro tip: If your coils are dying faster than 7 days, switch to a lower-sweetener e-liquid. Caramel, custard, and candy flavours are the biggest coil killers.

Where are VooPoo Coils made?

VooPoo is an e-cigarette brand based in China. They are committed to integrating research and development, quality manufacturing, sales and customer service to deliver high quality products to the vaping market.

Are VooPoo PnP Coils Good?

VooPoo PnP coils are one of the most popular & reliable coils on the market today. The PnP coils range is mainly used for Sub-Ohm vaping which means means to vape with a coil that is less than 1.0 ohms. Typically, using a low coil resistance of around 0.5 ohms with a powerful tank, sub-ohm vape devices allow vapers to benefit from a more flavourful hit that packs a punch and gives off much larger amounts of vapour.

Aside from being designed to be the easiest coils to remove, replace and install, the VooPoo PnP coils are also a surprisingly innovative peice of vaping technology. VooPoo designed these coils with differing power ranges and resistance levels for both direct to lung (DTL or sub-ohm) and mouth to lung (MTL) vape users to maximise flavour and consistency.

Which PNP Coil Is Best For You?

VooPoo’s PnP Coil Series is quite comprehensive, and they are still adding new options with the development of new kits and tanks.

Use this quick-chooser to find your coil in 30 seconds, then read the full breakdown below for detailed specs.

Offering up to 13 prebuilt coil options and a single rebuildable coil option at the time of writing, the PnP Coil Series is sure to have a coil or two for each type of user available. With the broad range of functions that VooPoo has covered, the PnP Coil Series is all extensive of the various vaping styles, materials, and coil configurations in the vaping industry. Whether you like MTL (Mouth-To-Lung), DTL (Direct-To-Lung) or RDL (Redirect-To-Lung), mesh or multi-wrapped coil options, the PnP Coil Series is sure to have an option for you as the coil options grow.

With a lot of coil options, resistances, and types available, the PnP coils can easily confuse the user, but one safe consideration is that buying the type that is included in the original package from VOOPOO is a reliable way to ensure the coils will be compatible with your device.

However, for those that pay a little more attention to detail, coils from the PnP Coil Series will work with your device under two conditions, the first being that the device must accept PnP Coils and secondly, the coil’s resistance must fall within the device’s acceptable resistance range. With this newfound knowledge in mind, let’s take a dive into each PNP coil to see what is best for you and your device or vaping experience.

VooPoo PNP Coil Compatibility Chart — All Models 2026

This is the most complete VooPoo PNP coil compatibility reference available. Two conditions must both be met for a coil to work in your device: (1) the device must accept PNP coils, and (2) the coil resistance must fall within your device’s supported range.

Coil	Resistance	Wattage	Style	Best Liquid	Best For
PNP VM1	0.3Ω	32–40W	DTL	60–70% VG	Everyday DTL, good flavour balance
PNP VM3	0.45Ω	25–35W	RDL	50–60% VG	Restricted DTL, flavour-forward
PNP VM4	0.6Ω	20–28W	MTL / RDL	50/50	Ex-disposable users, nic salts
PNP VM5	0.2Ω	40–60W	DTL	70% VG	Entry DTL with PNP Pod Tank
PNP VM6	0.15Ω	60–80W	DTL	50/50 to 70VG	Maximum output, cloud chasing
PNP R1	0.8Ω	12–18W	MTL	50/50	Classic MTL, smooth draw
PNP R2	1.0Ω	10–15W	MTL	50/50	Tightest MTL draw in the PNP range
PNP M2	0.6Ω	25–40W	DTL	60–70% VG	Dual mesh, heavy vapour production
PNP TM1	0.8Ω	20–28W	MTL	Nic salts / 50/50	Best flavour in MTL, tri-mesh design
PNP TM2	1.0Ω	10–20W	MTL	Nic salts	Ultra-tight MTL, ideal for 20mg nic salts
PNP TR1	1.2Ω	8–15W	MTL	Nic salts / 50/50	Tightest draw, cigarette-like feel
PNP TW15	0.15Ω	60–80W	DTL	70% VG	Traditional wire, high wattage DTL
PNP TW20	0.2Ω	40–80W	DTL	70% VG	Long-lasting wire coil, good with sweet liquids
PNP TW30	0.3Ω	32–40W	RDL	60–70% VG	Wire coil RDL, smooth, long lifespan
PNP RBA	Varies	Varies	Any	Any	DIY rebuilders — build your own coil

VooPoo PNP vs PNP-X Coils — What’s the Difference?

This is the most-searched question about PNP coils, so let’s answer it clearly.

PNP coils are the original format and work with the vast majority of VooPoo devices (Drag S, Drag X, Argus series, Vinci series, etc.). PNP-X is an updated pod format introduced with the Drag S PNP-X and Drag X PNP-X kits.

Key compatibility rule:: PNP-X pods accept both PNP and PNP-X coils. However, original PNP pods do not accept PNP-X coils. If you have a Drag S PNP-X or Drag X PNP-X, you can use your existing PNP coil stock.

In practice, the main functional differences are:

• PNP-X pods have slightly improved airflow sealing and slightly larger pod capacity
• PNP coil specs (resistance, wattage) are identical between the two systems
• If you’re buying coils for a Drag S PNP-X or Drag X PNP-X, standard PNP coils will work fine

Each PNP Coil Explained

In this section, you will find out the differences between each VooPoo PnP coil range, started with the PnP VM1.

PNP VM1 — 0.3Ω | 32–40W | DTL

With a mesh coil design at 0.3ohms, the PnP-VM1 comes with recommended wattage between 32-40W. Making its first appearance with the launch of the Vinci Pod Mod kit, the PnP VM1 is a great DTL coil option which creates decent tasting flavour with reasonable vapour production. The VM1 Coils are equipped with organic cotton and have a plug and play style installation to reduce vaping downtime. Due to its mesh technology, the PNP VM1 coils provide faster and evening distribution of heat to give them a longer lifespan. The PNP VM1 coils work best with higher VG e-liquids, particularly 60% VG and 70% VG e-liquids. 

The PNP VM1 coils are compatible with following VooPoo Vaping Devices:

• Drag S
• Drag X
• Drag S PNP-X
• Drag X PNP-X
• Argus GT
• Argus
• Argus PRO
• Navi
• Vinci Mod Pod
• Vinci R
• Vinci X
• Vinci X 2
• Vinci Air
• Drag 2 Refresh Edition
• Drag Mini Refresh Edition
• Drag Max
• Seal Kit
• Musket Kit

PNP VM3 — 0.45Ω | 25–35W | RDL

The PNP VM3 has a mesh coil design at 0.45 ohms and the recommended wattage is between 25-35W. This coil is another excellent addition to consider for DTL (Direct-To-Lung) vaping due to its ability to provide you with great flavour with little vapour production. Due to its even heat distribution throughout the mesh coil design, the PNP VM3 remains constant and reliable throughout its lifespan. We recommend using the PNP VM3 coils with either a 50% VG or 60% VG e-liquid. 

The PNP VM3 coils are compatible with following VooPoo Vaping Devices:

• Drag S
• Drag X
• Argus GT
• Argus Air
• Argus PRO
• Navi
• Vinci Mod Pod
• Vinci R
• Vinci X
• Vinci X 2
• Vinci Air
• Drag 2 Refresh Edition
• Drag Mini Refresh Edition
• Drag Max
• Seal Kit
• Musket Kit
• PNP Pod Tank

PNP VM4 — 0.6Ω | 20–28W | MTL / RDL

At 0.6ohm with mesh coil build, the PnP VM4 comes with recommended wattage between 20-28W. Stepping up from the previous this PnP coil provides a full MTL vape or a restricted DTL vape depending on airflow settings. Thanks to its newly designed multi mesh configuration the PNP VM4 provides amazing flavour and vapour production.  As these are MTL coils they’ll work best with 50% PG e-liquid.

The PNP VM4 coils are compatible with following VooPoo Vaping Devices:

• Argus Air
• Argus GT
• Drag S
• Drag X
• Drag Max
• Drag Mini Refresh
• Drag 2 Refresh
• Navi
• Vinci Air
• Vinci Mod Pod
• Vinci R
• Vinci X

PNP VM5 — 0.2Ω | 40–60W | DTL

The PNP VM5 is also designed with a mesh coil configuration at 0.2Ohm. The recommended wattage for optimum performance is between 40-60W on your VooPoo vape device. We would suggest the PNP VM5 coil to be a great entry point coil for a Mouth-To-Lung vape experience. The VM5 coil pairs great with the PNP pod tank due to its refillable pod tank and plug and play style of vaping. To further enhance your vaping experience with PNP VM5 coil, you can attach a PNP 510 connector to utilize the highest potential that the coil has to offer as it will provide for excellent cloud and flavour production! As these are DTL coils they’ll work best with a 70% VG e-liquid.

The PNP VM5 coils are compatible with following VooPoo Vaping Devices:

• Argus GT
• Argus air
• PNP Pod Tank
• Drag 2 Refresh Edition
• Drag Mini Refresh Edition
• Drag X
• Drag S
• Vinci X
• Vinci air
• Vinci
• Argus
• Argus Pro
• Drag Max

PNP VM6 — 0.15Ω | 60–80W | DTL

The PNP VM6 coils are designed with mesh coil technology to provide faster and even heating to prevent accidental harsh hits. With an atomizer resistance of 0.15ohm, these coils provide a recommended output ranging between 60-80W. The PnP-VM6 promotes a direct to lung experience & we would be the next step up from the PNP VM5 coil.

You will notice that the VM6 coil has a noticeable increase in performance and provides users with great tasting flavour and vapour production throughout its immense Direct-To-Lung attribute. We would suggest pairing the PNP VM6 with the Drag X Pod Kit for a harmonious combination. The PNP VM6 coils are best run at a higher wattage, but due to the smaller wicking holes on the coil, it works best with 50/50 pg vg e-liquids.

The PNP VM6 coils are compatible with following VooPoo Vaping Devices:

• Argus GT
• Argus Air
• PNP Pod Tank
• Drag 2 Refresh Edition
• Drag Mini Refresh Edition
• Drag X
• Drag S
• Vinci X
• Vinci air
• Vinci
• Argus
• Argus pro
• Drag max

PNP R1 — 0.8Ω | 12–18W | MTL

The PNP R1 has dual coil design at 0.8ohm and comes with recommended wattage between 12-18W. The round wire configuration on this coil creates excellent heat distribution to create an all-round satisfying MTL vaping experience. The PNP R1 coil is equipped with organic cotton and like the others, have a plug and play coil installation. These MTL coils work best with a 50/50 e-liquids.

The PNP R1 coils are compatible with following VooPoo Vaping Devices:

• Argus GT
• Argus Air
• PNP Pod Tank
• Drag 2 Refresh Edition
• Drag Mini Refresh Edition
• Drag X
• Drag S
• Vinci X
• Vinci Air
• Vinci
• Argus
• Argus Pro
• Drag Max

PNP R2 — 1.0Ω | 10–15W | MTL

Also, with a dual coil design at 1.0ohm, the PNP R2 comes with recommended wattage between 10-15W. With like for like capabilities and design to that of the PNP R1, you can expect a slight increase in flavour with the PNP R2. However, that will come at a cost with a slight decrease in vapour production. These MTL coils work best with a 50/50 e-liquids.

The PNP R2 coils are compatible with following VooPoo Vaping Devices:

• Argus GT
• Argus air
• PNP Pod Tank
• Drag 2 Refresh Edition
• Drag Mini Refresh Edition
• Drag X
• Drag S
• Vinci X
• Vinci Air
• Vinci
• Argus
• Argus Pro
• Drag Max

PNP M2 — 0.6Ω | 25–40W | DTL

With a single coil build at 0.6ohm resistance, the PNP M2 coil comes with a recommended wattage between 20-28W. Due to its single mesh coil design, the user can often expect consistent strong flavour profiles throughout the lifespan of the coil. The PNP M2 coil was built for a marathon & work great with the VooPoo Vinci Mod Pod Kit! These MTL coils work best with a 50/50 e-liquids.

The PNP M2 coils are compatible with following VooPoo Vaping Devices:

• Argus GT
• Argus Air
• PNP Pod Tank
• Drag 2 Refresh Edition
• Drag Mini Refresh Edition
• Drag X
• Drag S
• Vinci X
• Vinci Air
• Vinci
• Argus
• Argus Pro
• Drag max
• Navi
• Drag Baby
• Vinci R

PNP TM1 — 0.8Ω | 20–28W | MTL

The PNP TM1 comes at a resistance of 0.6ohm and the recommended wattage between 20-25W. The TM1 is one of the latest entries to the PNP coil series and is aimed towards nic salt e-liquids whilst creating a pleasant MTL vaping experience. The PNP TM1 coil is compatible with a wide range of VooPoo devices although best with pod kits designed around salt nic usage such as the Argus Air Pod Kit. The TM1 coils work best with a 50/50 e-liquids or nic-salts.

The PNP TM1 coils are compatible with following VooPoo Vaping Devices:

• Vinci
• Vinci R
• Vinci X
• Vinci Air
• Drag S
• Drag X
• Navi
• PNP 22 & 20 Kits
• Argus GT
• Argus Air
• V.Suit
• Drag Max

PNP TM2 — 1.0Ω | 10–20W | MTL

Coming with a single mesh coil configuration at 0.8ohm resistance, the PNP TM2 comes with a recommended wattage between 12-18W. The TM2 coils has similar features to the ones of the PNP TM1, however you can expect an increase in flavour quality coming at a cost of slightly reduced vapour production. TM2 coils work best with a 50/50 e-liquids or nic-salts.

The PNP TM2 coils are compatible with following VooPoo Vaping Devices:

• Vinci
• Vinci R
• Vinci X
• Vinci Air
• Drag S
• Drag X
• Navi
• PNP 22 & 20 Kits
• Argus GT
• Argus Air
• V.Suit
• Drag Max

PNP TR1 — 1.2Ω | 8–15W | MTL

One of the most recent additions to the PNP coil series, the PNP TR1 has a mesh coil design and comes with a recommended wattage between 10-15W. The PNP TR1 coil is best used with nic salts much like the PNP TM1 & PNP TM2. This coil pairs excellently with the VooPoo Argus Pod Kit for a fantastic all-round flavour and cloud production.

The PNP TR1 coils are compatible with following VooPoo Vaping Devices:

• Vinci
• Vinci R
• Vinci X
• Vinci Air
• Drag S
• Drag X
• Navi
• PNP 22 & 20 Kits
• Argus GT
• Argus Air
• V.Suit
• Drag Max

PNP RBA — Rebuildable

With a post less build deck and single coil configuration, the PnP-RBA is compatible with most devices including the Vinci Pod Mod,Vinci X, Drag S,Drag X, Argus Pod Kit and more! A post less build deck just has holes in the bottom of it so that the ends of the coils go into them. The PNP RBA will only facilitate a single coil to be installed onto it.

The Voopoo PnP RBA Coil is a great addition to have if you want to build your own coils in your VooPoo device that takes stock coils (All PNP coils which are not RBA). Obviously, this RBA will only fit in the specified Voopoo devices to replace the stock Voopoo PnP coils.

The PNP RBA coil comes included with a 0.6ohm coil, wick, a coil tooling jig, 2 O-rings and small screwdriver to start you off on your DIY vape experience. We recommend starting off on the 0.6ohm coil that comes in the box to see how you get on with the installation of it and performance achieved. Once you are comfortable, you can then try out with different coils and wicking techniques if you’d like to.

We can say that PNP RBA coil has good build quality & the performance is pretty good, but again it is DIY, so it all depends on what build configuration you go for. Another good thing with the PNP RBA is that it comes with spare parts to help with the installation.

We recommend the PNP RBA coils for advanced vapers as the build takes little bit of tweaking to be get your desired results.

The PNP RBA coils are compatible with following VooPoo Vaping Devices:

• Vinci
• Vinci 2
• Vinci X
• Vinci X2
• Drag S
• Drag X
• Drag Max
• Argus
• Argus Pro
• Argus GT
• Argus Air

PNP TW15 / TW20 / TW30 — Traditional Wire Coils

---

---

The PnP-TW15 coils are the latest release from the PnP coil range. Featuring an ohmage of 0.15 and supporting power outputs between 55-70W. Another new release from the PnP coil range is the PnP TW20 coil which features a resistance of 0.20ohm and power output between 40-55W. Lastly, the PnP TW30 coil features a resistance of 0.30ohm and supports a power output between 28-36W.

The PnP-TW replacement coils are a brand new range of longer lasting mesh coils designed to be 25% longer lasting than conventional mesh coils. The PnP-TW coils run best at a higher wattage, but due to the metal sheath construction and smaller wicking hole design, they are best suited to 50/50 and Nic Salt e-liquids.

The PNP TW coils are compatible with following VooPoo Vaping Devices:

• Argus Pro Pod Kit (PnP Pod)
• Drag E60 Pod Kit (PnP 2 Pod)
• Drag H40 Pod Kit (PnP 2 Pod)
• Drag H80S Pod Kit (PNP 2 Pod)
• Vinci 3 Pod Kit (Vinci 3 Pod/Cartridge)

How to Prime a VooPoo PNP Coil (Step-by-Step)

As the VooPoo PnP coils are made for Sub-Ohm vaping, they must be primed before use. The low resistance means more power is drawn from the battery of your chosen VooPoo vape device. The end result is massive amounts of vapor, which is awesome of course, but with more power comes more responsibility! And that means you have to prime the coils so they don’t burn out. We have put together a step by step process on how to prime your PnP coils before use.

⚠️ Don’t skip this::Vaping on an unprimed coil for even 2–3 puffs can permanently burn the cotton wick, ruining a new coil before you’ve even started.

1. Remove the new coil from packaging Check the coil type printed on the side — make sure it matches your device’s supported resistance range.
2. Apply 3–5 drops of e-liquid to the wicking ports Look at the side of the coil — you’ll see small rectangular openings (the wicking ports). Apply 1 drop of e-liquid to each port. Also add 1–2 drops down the top of the coil centre.
3. Install the coil into your pod Push the coil into the pod until it clicks into position. Fill your pod with e-liquid and replace the pod into the device.
4. Wait 5-10 minutes Let the e-liquid fully saturate the cotton inside the coil. This is the step most people skip — don’t. 10 minutes makes a measurable difference to coil lifespan.
5. Take 3–5 primer puffs (no fire button) Draw on the device without pressing the fire button. This pulls e-liquid through the coil and eliminates any remaining dry spots in the cotton.
6. Start at low wattage and build up Set your device 5–10W below your target wattage. Take 2–3 puffs, then increase by 5W at a time until you reach your preferred wattage. Breaking in a coil like this significantly extends its lifespan.

💡 Tip: If you still get a slightly burnt taste after priming, your wattage may be too high. Drop it by 5W and try again before assuming the coil is faulty.

The ten minute wait is prime time for priming! User manuals suggest for some coil manufacturers suggest waiting five minutes. However, we recommend waiting 10 minutes to be on the safe side. The reason behind this is that the cotton wick can be dense and may require additional time to saturate. So patience is key in this instance to get your VooPoo PnP coils full primed and ready to rumble!

How to Clean a VooPoo PNP Coil

You can extend PNP coil life by cleaning them when you notice reduced flavour — but only mesh coils (VM series, TM series, M2). Wire coils (R1, R2, TW series) respond less well to cleaning. The RBA can be dry-burned and re-wicked.

How to Clean a PNP Mesh Coil (VM / TM / M2)

1. Remove the coil from the pod and hold it under warm running water for 30–60 seconds.
2. Shake off excess water firmly.
3. Leave to air-dry on a paper towel for at least 2 hours — or ideally overnight.
4. Re-prime using the priming steps above before using again.

⚠️ Do not use isopropyl alcohol on mesh coils — it can damage the organic cotton wicking material. Warm water only.

How to clean a PNP RBA Coil

1. Remove the wicking cotton from the RBA deck.
2. Dry-burn the coil at low wattage (15–20W) in 3-second pulses until it glows evenly and any residue burns off.
3. Hold under cold running water immediately after to quench the coil — this removes carbonised residue.
4. Repeat the dry-burn and quench process 2–3 times until the coil glows clean and even.
5. Re-wick with fresh cotton and prime before use.

Can You Use PnP Coils In A TPP Tank?

No — PNP coils and TPP coils are not interchangeable. The TPP platform uses a different form factor designed for VooPoo’s higher-wattage mod devices (Drag 3, Drag 4, etc.). If you have a TPP device, you need VooPoo TPP coils. If you have a PNP device (Drag S, Drag X, Argus), you need PNP coils. The two systems look similar but are not compatible.

Can The VooPoo Drag 3 Use PnP Coils?

No. The Drag 3 uses TPP coils in the TPP Tank, not PNP coils. However, if you have a PNP pod that’s compatible with the Drag 3 (some editions ship with both tank and pod options), those pods will accept PNP coils.

Best PNP Coil for Flavour

MTL flavour: PNP TM1 or TM2. The tri-mesh heating surface at high resistance creates a concentrated, detailed flavour hit that the VM series can’t match in MTL style. If flavour is your priority and you prefer a tighter draw, the TM1 is the best coil in the entire PNP range.

DTL flavour: PNP VM3 or VM5. For open-lung vaping, the VM3’s 0.45Ω balanced output and the VM5’s larger mesh surface both deliver excellent flavour definition. The VM3 edges it for flavour accuracy; the VM5 wins for sheer vapour volume.

Best PNP Coils for Nic Salts (2026)

If you’re using 10mg or 20mg nic salts — especially if you’ve switched from disposable vapes — you need a higher-resistance coil that delivers nicotine efficiently without needing high wattages. The following PNP coils are best suited to nic salt e-liquids:

• PNP TM2 (1.0Ω) — Best overall nic salt coil. Tri-mesh at 1.0Ω delivers excellent flavour and smooth nicotine at 10–20W.
• PNP TR1 (1.2Ω) — Tightest draw, closest to disposable feel. Ideal for 20mg nic salts if you want maximum nicotine efficiency.
• PNP TM1 (0.8Ω) — Best for 10mg nic salts where you want more flavour but still MTL draw.
• PNP VM4 (0.6Ω) — If you want a slightly looser draw than MTL with nic salts, the VM4 bridges the gap.

Best PNP coil for 70/30 E-Liquids

70% VG liquids need coils with larger wicking ports to avoid dry-hitting. Best choices: VM5 (0.2Ω), VM1 (0.3Ω), TW15 (0.15Ω), or TW20 (0.2Ω). Avoid using 70/30 with VM4, R1, R2, or TM2 — the thick VG ratio won’t wick fast enough at these resistances.

Best PNP coil for 50/50 E-Liquids

50/50 liquids are the most versatile — they work with almost every PNP coil. For 50/50 DTL: VM3, VM4, VM6. For 50/50 MTL: R1, R2, TM1, TM2, TR1. 50/50 is also a good starting choice if you’re unsure which coil to pair with a new device.

How Long Do VooPoo PNP Coils Last?

With regular use (10–20ml of e-liquid per day), most PNP coils last 7–14 days. Signs your coil needs replacing:

• Noticeably reduced flavour or a muted, flat taste
• A mild burnt or slightly charred flavour that priming won’t fix
• Gurgling sounds or e-liquid spitting into your mouth
• Reduced vapour production at your normal wattage

Factors that shorten coil life:

• Sweet/dessert e-liquids — sucralose caramelises on the coil and gunks up the wick fastest. If you vape sweetened liquids, TW-series wire coils last longer than mesh.
• Chain vaping — taking back-to-back puffs doesn’t give the wick time to re-saturate. Take 30-second breaks between puffs.
• High wattage — running above the recommended wattage range burns the cotton faster.

VooPoo PNP Coil FAQ